![](../../../Pictures/03/0/02VE31J.JPG) 3002 |
Click on the above image for a full view ... |
|
|
Two independent stereo channels, or 2 mono pairs |
|
Electronic attenuators - no more potentiometer crackles! |
|
Pre-fade listening (PFL) |
|
Fader-controlled start/stop facility for turntables, tape |
|
On-board voltage regulators |
|
LED peak detector |
|
Long fader life |
|
Mixing systems (particularly those of radio stations and disco |
|
Uprating existing equipment |
|
DC control of volume |
This module uses electronic control for fading of two stereo channels. Crackles produced by the sliding potentiometers have been eliminated completely through the use of high quality electronic volume control circuitry (DC control). |
The adjustment range exceeds 100dB, and noise produced by the fader is kept below -95dB. Both channels are equipped with a PFL (pre-fade listen) switch, a peak detector (+3dB), and an automatic starting control circuit for record players (pulse or continuous output). |
Number of channels: |
2 stereo (4 in all) |
Distortion: |
0· 05% (max.) |
Signal-to-noise ratio: |
>90dB |
Fader start/stop rating: |
24V at 50mA |
Attenuation (slider at min.): |
90dB |
PCB dimensions: |
138 x 98mm |
Power supply: |
▒15V regulated |
|